بررسی پایداری در طراحی زنجیره تأمین

نویسندگان

1 کارشناس ارشد مهندسی صنایع، دانشگاه علم و صنعت

2 عضو هیات علمی دانشکده مهندسی صنایع، دانشگاه علم و صنعت

چکیده

باتوجه به تغییرات آب­وهوا، پایان سوخت فسیلی و کمبود منابع طبیعی تقریباً همه شرکت­ های صنعتی با چالش پایداری مواجه هستند. در واقع مدیریت پایداری به دنبال تعادل عملکرد اقتصادی، زیست­محیطی و اجتماعی است. زنجیره ­تأمین پایدار به سه امر مهم محیط­ زیست، اقتصاد و اجتماع پرداخته و از این طریق ارزش­ هایی را کسب می­ کند. باتوجه به اهمیت پایداری در این مقاله ابتدا تعاریف مختلفی از پایداری و مدیریت زنجیره ­تأمین پایدار بیان شده، سپس مقالات مهم در زمینه طراحی زنحیره ­تأمین پایدار و مدیریت زنجیره­تأمین پایدار طی سال ­های 2005 تا 2014 مرور می­ شوند. این مقالات با توجه به نوع تابع هدف، موضوع مسئله، عدم قطعیت، رویکرد مسئله و ... دسته­ بندی شده­اند و نتایج کار در قالب ابزارهای گرافیکی نمایش داده شده است. در نهایت نقاط قوت و ضعف کارهای پیشین بیان شده و با استفاده از شکاف­ ها و خلأهای تحقیقاتی، موضوعاتی برای تحقیقات آتی مطرح شده است. تاکنون اکثر مقالات مروری در این زمینه به مرور مفاهیم مدیریت زنجیره­ تأمین پایدار پرداخته ­اند و دسته­ بندی مقالات از لحاظ عدم قطعیت، نوع تابع هدف، موضوع مسئله و توجه به طراحی زنجیره­ تأمین پایدار ازجمله دسته ­بندی­ های جدیدی است که در این مقاله به آن پرداخته شده است.

کلیدواژه‌ها

مراجع

  1. Kim, K., Jeong, B., Jung, H., “Supply chain surplus: comparing conventional and sustainable supply chains” Flex Serv Manuf J, vol. 26, pp. 5-23, 2012.
  2. Carter, C.R, Rogers, D.S., “A framework of sustainable supply chain management: moving toward new theory” Int J Phys Distrib Logist Manag, vol. 38, pp.360–387, 2008.
  3. Dyllick, T., Hockerts, K., “Beyond the business case for corporate sustainability” Business Strategy and the Environment, vol.11, pp. 130–141, 2002.
  4. Van Marrewij, k. M., “Concepts and definitions of CSR and corporate sustainability: Between agency and communion” Journal of Business Ethics, vol.44, pp.95–105, 2003.
  5. Guide, V.D.R., Srivastava, R., Krause, M.E. “Product structure complexity and scheduling of operations in recoverable manufacturing” Int J Prod Res, vol. 35, pp.3179–3199, 1997.
  6. Krikke, H., “Recovery strategies and reverse logistics networks design” Doctoral dissertation, University of Twente, Twente, 1998.
  7. Zhou, Z., Cheng, S., Hua, B., “Supply chain optimization of continuous process industry with sustainability consideration” Comput Chem Eng, vol.24, pp.1151–1158, 2000.
  8. Linton, J.D., Klassen, R., Jayaraman, V., “Sustainable supply chains: an introduction” J Oper Manag, vol. 25, pp.1075–1082, 2007.
  9. Elkington, J., “Cannibals with forks. The triple bottom line of 21st century business” New Society Publishers, Tintown, 1998.
  10. Hassini, E., Surti, C., Searcy, C., “A literature review and a case study of sustainable supply chains with a focus on metrics” Int. J. Production Economics, vol. 140, pp. 69–82, 2012.
  11. Shi, P., Yan, B., Shi, S., Ke, C., “A decision support system to select suppliers for a sustainable supply chain based on a systematic DEA approach” Inf Technol Manag, 2014.
  12. Chaabane, A., Ramudhin, A., Paquet, M., “Designing supply chains with sustainability considerations” Prod Plan Control, vol.22, pp.727–741, 2011.
  13. Chaabane, A., Ramudhin, A., Paquet, M., “Design of sustainable supply chains under the emission trading scheme” Int J Prod Econ, vol. 135, pp.37–49, 2012.
  14. Chiu, M.C., Teng, L.W., “Sustainable Product and Supply Chain Design Decisions under Uncertainties” International Journal of Precision Engineering and Manufacturing, vol. 14, pp.1953-1960, 2013.
  15. Wang, L.C., Chen, T.L., Chen, Y.Y., Chen, Y.w., Wang, A., “Closed-Loop Sustainable Supply Chain Design Under Uncertainties” Springer International Publishing Switzerland, 2013.
  16. Kannegiesser, M., Gunther, H.O., “Sustainable development of global supply chains—part 1: sustainability optimization framework” Flex Serv Manuf J, 2013.
  17. Pishvaee, M.S., Razmi, J., Torabi, S.A., “An accelerated Benders decomposition algorithm for sustainable supply chain network design under uncertainty: A case study of medical needle and syringe supply chain” Transportation Research Part E, vol. 67, pp.14–38, 2014.
  18. Morali, O., Searcy, C., “A Review of Sustainable Supply Chain Management Practices in Canada” J Bus Ethics, vol.117, pp.635–658, 2012.
  19. Gold, S., Seuring, S., Beske, P., “Sustainable supply chain management and inter-organizational resources: A literature review” Corporate Social Responsibility and Environmental Management, vol.17, pp. 230–245, 2010.
  20. Sarkis, J., “Manufacturing’s role in corporate environmental sustainability: Concerns for the new millennium” International Journal of Operations & Production Management, vol. 21, pp.666–686, 2001.
  21. Darnall, N., Jolley, G.J., Handfield, R., “Environmental Management Systems and Green Supply Chain Management: Complements for Sustainability?” Business Strategy and the Environment, vol.18, pp.30–45, 2008.
  22. Storey, J., Emberson, C., Godsell, J., Harrison, A., “Supply chain management: Theory, practice and future challenges” International Journal of Operations & Production Management, vol.26, pp.754–774, 2006.
  23. Seuring, S., Muller, M., “From a literature review to a conceptual framework for sustainable supply chain management” J Clean Prod, vol. 16, pp.1–12, 2008.
  24. Seuring, S., Muller, M., “Core Issues in Sustainable Supply Chain Management – a Delphi Study” Business Strategy and the Environment, vol.17, pp. 455–466, 2008.
  25. Wu, Z., Pagell, M., “Balancing priorities: Decision-making in sustainable supply chain management” Journal of Operations Management, vol.29, pp.577–590, 2011.
  26. Carter, C.R., Easton, P.L., “Sustainable supply chain management: evolution and future directions” International Journal of Physical Distribution & Logistics Management, vol. 41, pp.46-42, 2011.
  27. Wolf, J., “The Relationship Between Sustainable Supply Chain Management, Stakeholder Pressure and Corporate Sustainability Performance” J Bus Ethics, 2012.
  28. Seuring, S., “A review of modeling approaches for sustainable supply chain management” Decision Support Systems, vol. 54, pp.1513–1520, 2013.
  29. Ahi, P., Searcy, C., “A comparative literature analysis of definitions for green and sustainable supply chain management” J. Cleaner Prod, vol. 52, pp. 329–341, 2013.
  30. Turker, D., Altuntas, C., “Sustainable Supply Chain management in the fast fashion industry: An analysis of corporate reports” European Management Journal, 2014.
  31. Bing, X., Bloemhof-Ruwaard, J.M., van der Vorst, J., “Sustainable reverse logistics network design for household plastic waste” Flex Serv Manuf J, 2012.
  32. Li, X., Chien, C-F., Yang, L., Gao, Z., “The train fueling cost minimization problem with fuzzy fuel prices” Flex Serv Manuf J, vol. 26, pp.249–267, 2012.
  33. Kopfer, H.W., Schonberger, J., Kopfer, H., “Reducing greenhouse gas emissions of a heterogeneous vehicle fleet” Flex Serv Manuf J, 2013.
  34. Rice, Gareth, Roland Clift et Richard Burns, “Comparison of currently available european LCA software” The International Journal of Life Cycle Assessment, vol. 1, pp. 53-59, 1997.
  35. Hutchins, M.J., Sutherland, J.W., “An exploration of measures of social sustainability and their application to supply chain decisions” Journal of Cleaner Production, vol. 16, pp.1688–1698. 2008.
  36. Labuschagne, C., Brent, A.C., “Social Indicators for Sustainable Project and Technology Life Cycle Management in the Process Industry” Int J LCA, vol.11, pp. 3 – 15. 2006.
  37. Chi, T., “Building a sustainable supply chain: an analysis of corporate social responsibility (CSR) practices in the Chinese textile and apparel industry” The Journal of The Textile Institute, vol.102, pp. 837-848, 2011.
  38. Pishvaee, M.S., Razmi, J., Torabi, S.A., “Robust possibilistic programming for socially responsible supply chain network design: A new approach” Fuzzy Sets and Systems, vol. 206, pp. 1–20, 2012.
  39. Carroll, A.B., “A three-dimensional conceptual model of corporate performance” Academy of Management Review, vol. 4, pp. 497–505, 1979.
  40. Hermann, C., Schmidt, C., Kurle, D., Blume, S., Thiede, S.,”Sustainability in Manufacturing and Factories of the Future” International journal of precision engineering and manufacturing-green technology, vol.4, pp. 283-292, 2014.
  41. Vela´zquez-Martı´nez, J.C., Fransoo, J., Blanco, E., Mora-Vargas, J., “The impact of carbon footprinting aggregation on realizing emission reduction targets” Flex Serv Manuf J, vol. 26, pp.196–220, 2013.
  42. Fransoo, J.C., Gunther, H-O., Jammernegg, W., “Environmental sustainability in supply chains” Flex Serv Manuf J, vol. 26, pp.1–4, 2013.
  43. Zaabi, S.A., Dhaheri, N.A., Diabat, A., “Analysis of interaction between the barriers for the implementation of sustainable supply chain management” Int J Adv Manuf Technol, vol. 68, pp.895–905, 2013.
  44. Chuang, S-P., “Assessing and improving the green performance using a compound approach” Flex Serv Manuf J, vol. 26, pp.69–91, 2012.
  45. Pan, S., Ballot, E., Fontane, F., Hakimi, D.,”Environmental and economic issues arising from the pooling of SMEs’ supply chains: case study of the food industry in western France” Flex Serv Manuf J, 2012.
  46. Treitl, S., Nolz, P.C., Jammernegg, W., “Incorporating environmental aspects in an inventory routing problem. A case study from the petrochemical industry” Flex Serv Manuf J, vol.26, pp.143–169, 2012.
  47. Hoen, K. M. R., Tan, T., Fransoo, J.C., van Houtum, G.J., “Effect of carbon emission regulations on transport mode selection under stochastic demand” Flex Serv Manuf J, vol. 26, pp.170–195, 2012.
  48. Stindt, D., Sahamie, R., “Review of research on closed loop supply chain management in the process industry” Flex Serv Manuf J, 2012.
  49. Young, D., Hawkins, T., Ingwersen, W., Lee S.- J., Ruiz-Mercado, G., Sengupta, D., and Smith, R.L., “Designing sustainable supply chains” Chemical Engineering Transactions, vol.29, pp.253-258, 2012.
  50. Bevilacqua, M., Ciarapica, F.E., Giacchetta, G. “Design for Environment as a Tool for the Development of a Sustainable Supply Chain” Springer-Verlag London, 2012
  51. Garetti, M., Taisch, M., “Sustainable manufacturing: trends and research challenges” Prod Plan Control, vol.23, pp.83–104, 2012
  52. Caniato, F., Caridi, M., Crippa, L., Moretto, A., “Environmental sustainability in fashion supply chains: An exploratory case based research” Int. J. Production Economics, vol. 135, pp. 659–67, 2012.
  53. Gimenez, C., Tachizawa, E.M., “Extending sustainability to suppliers: a systematic literature review” Supply Chain Management: An International Journal, vol.17, pp.531–543, 2012.
  54. Stupak, I., Lattimore, B., Titus, B.D., Smith, C.T., “Criteria and indicators for sustainable forest fuel production and harvesting: A review of current standards for sustainable forest management” Biomass and Bio Energy, vol. 35, pp.3287-3308, 2011.
  55. Cetinkaya, B., Cuthbertson, R., Ewer, G., Klaas-Wissing, T., Piotrowicz, W., Tyssen, C. “Sustainable Supply Chain Management” Springer Heidelberg Dordrecht London New York, 2011.
  56. Closs, D.J., Speier, C., Meacham, N., “Sustainability to support end-to-end value chains: the role of supply chain management” J. of the Acad. Mark. Sci, vol. 39, pp.101–116, 2011.
  57. De Brito, M.P., van der Laan, E.A., “Supply chain management and sustainability: procrastinating integration in mainstream research” Sustainability, vol. 2, pp.859–870, 2010.
  58. Dehghanian, F., Mansour, S., “Designing sustainable recovery network of end-of-life products using genetic algorithm” Resources Conservation and Recycling, vol. 53, pp.559–570, 2009.
  59. Pagell, M., Wu, Z., “Building A More Complete Theory Of Sustainable Supply Chain Management Using Case Studies Of 10 Exemplars” Journal of Supply Chain Management, vol.45, pp. 37-56, 2009.
  60. Samuel, B.M., Manring, S.L., “Strategy development in small and medium sized enterprises for sustainability and increased value creation” Journal of Cleaner Production, vol. 17, pp.276–282, 2009.
  61. Lattimore, B., Smith, C.T., Titus, B.D., Stupak, I., Egnell, G., “Environmental factors in woodfuel production: Opportunities, risks, and criteria and indicators for sustainable practices” Biomass And Bio Energy, vol. 33, pp. 1321 – 1342, 2009.
  62. Albino, V., Balice, A., Dangelico, R.M., “Environmental strategies and green product development: an overview on sustainability-driven companies” Business Strategy and the Environment, vol. 18, pp. 83e96, 2009.
  63. Editorial, “Sustainability and supply chain management - An introduction to the special issue” Journal of Cleaner Production, vol.16, pp. 1545-1551, 2008.
  64. White, L., Lee, G.J. “Operational research and sustainable development: Tackling the social dimension” European Journal of Operational Research, vol. 193, pp.683–692, 2009.

فایل ها

سابقه مقاله

  • تاریخ دریافت: 25 آذر 1396
  • تاریخ بازنگری: 01 آذر 1403
  • تاریخ پذیرش: 28 شهریور 1397
  • تاریخ انتشار: 01 شهریور 1396

هم رسانی

ارجاع به این مقاله

آمار